Settings In The "System" Menu" (System Menu) - ProMinent delta DLTa optoDrive Operating Instructions Manual

10.6.9

Settings in the "System" menu" (SYSTEM menu)

Continuous
display
10.6.9.1 Settings in the sub-menu "Units"
10.6.9.2 Settings in the "Diaphragm active" sub-menu
10.6.9.3 "Info" sub-menu
Menu
Menu
P
Settings Settings
System System
The "System" menu branches into the following sub-menus:
Unit
n
Diaphragm active
n
Info
n
Change head?
n
'Units' sub-menu, you can select whether the pump uses litres or
In the
gallons (US).
'Diaphragm active' sub-menu you can select whether the pump
In the
generates a warning or error alert upon a diaphragm rupture.
CAUTION!
The diaphragm rupture sensor must first be activated in the
operating menu, in order that it can be detected by the pump.
In the "Info" sub-menu you can read off the following identification num‐
bers:
Identity code ID
n
Serial number SN
n
Software control SW
n
Hardware control HW
n
Software drive AS
n
Hardware drive AH
n
Name module-option (e.g. proTIME)
n
Software option OS
n
Hardware option OH
n
Submenu Submenu
P
Unit Unit
Submenu
Diaphragm Aktiv. Diaphragm Aktiv.
Submenu
Change head? Change head?
Submenu
Info Info
Set up
67