Storage, Transport And Unpacking - ProMinent delta DLTa optoDrive Operating Instructions Manual

Storage, transport and unpacking

4 Storage, transport and unpacking
Safety notes
Safety notes
Ambient conditions
Scope of supply
14
WARNING!
The pump can tip over when lifting
The pump can tip over when lifting, as the centre of gravity of
the pump is quite a distance from the liquid end.
– Grip the pump quite close to the liquid end.
WARNING!
The transporting of pumps which have been used with radio‐
active feed chemicals is forbidden!
They will also not be accepted by ProMinent!
WARNING!
Only return metering pumps for repair in a cleaned state and
with a flushed liquid end - refer to "Decommissioning!
Only return metering pumps with a completed Decontamina‐
tion Declaration form. The Decontamination Declaration con‐
stitutes an integral part of an inspection / repair order. A unit
can only be inspected or repaired when a Declaration of
Decontamination Form is submitted that has been completed
correctly and in full by an authorised and qualified person on
behalf of the pump operator.
You can find the "Decontamination Declaration" form under
www.prominent.com/en/downloads or on the CD.
CAUTION!
Danger of material damage
The device can be damaged by incorrect or improper storage
or transportation!
– The unit should only be stored or transported in a well
packaged state - preferably in its original packaging.
– The packaged unit should also only be stored or trans‐
ported in accordance with the stipulated storage condi‐
tions.
– The packaged unit should be protected from moisture
and the ingress of chemicals.
Refer to the "Technical Data" chapter
Compare the delivery note with the scope of supply:
Metering pump with mains power cable
n
Connector kit for hose/pipe connection
n
Product-specific operating instructions with EC Declaration of Con‐
n
formity
Optional accessories if ordered
n
Relay cable, as necessary
n