Y Connector For I/O Module 16 Do 0.5 A - Siemens SIMATIC ET 200eco Manual

Wiring
Pin assignment for the Y connector of I/O module 16 DI
Table 3-7
Pin Assignment for coupler plug X1 to X8
1 24V sensor power supply (1L+)*
2 n.c.
3 Ground potential, sensor power supply
(1M)
4 Input signal
at Pin 4**
5 PE
* sensor power supply via ET 200eco
** the pins specified refer to the connecting socket on the I/O module
Pin assignment for the Y connector of I/O module 16 DO 0.5 A
Table 3-8
Pin Assignment for coupler plug X1 to X8
1 n.c.
2 n.c.
3 Ground potential, load voltage supply (2M)
4 Output signal
from pin 4*
5 PE
* The pins specified refer to the connecting socket on the I/O module.
3-16
The Y connector and I/O module 16 DI
A (top) B (lower)
Input signal
at Pin 2**

Y connector for I/O module 16 DO 0.5 A

A (top) B (lower)
Output signal
from pin 2*
Layout
Y connector
A (top)
4
3 5 1
2
3- or 4-conductor
copper cable
2 2
1 5 3
4
B B
(bottom)
Layout
Y connector
A (top)
4
3 5 1
2
3- or 4-conductor
copper cable copper cable
2
1 3
5
4
B
(bottom)
ET 200eco Distributed I/O Station
A5E00158716-02