Edition - Siemens SIMATIC ET 200eco Manual

Preface
Purpose of this manual
The information in this manual helps you to operate the ET 200eco distributed
I/O station as DP slave on PROFIBUS DP.
Basic knowledge required
To understand the manual, you require general experience in the field of
automation engineering.
This manual edition contains a description of the components valid at the time of
its release. We reserve the right to append a Product Information that contains
up–to–date information on new components or components of a new version.
Range of validity of this manual
This manual is valid for the ET 200eco distributed I/O station.
Changes as compared to the previous version
This manual contains the following changes and additions as compared to the
previous manual:
• I/O module 16 DO 0.5 A (6ES7 142-3BH00-0XA0)
• I/O module 8 DI / 8 DO 1.3 A (6ES7 143-3BH00-0XA0)
Note: You tell the previous version of the ET 200eco manual by the number
indicated in the footer: A5E00158716-01.
The number of this manual is: A5E00158716-02.
CE label
The product series SIMATIC S7- ET 200eco distributed I/O station is compliant
with requirements and protective aims of following EU guidelines.
• EU guideline 73/23/EEC "Low–voltage guidelines"
• EU guideline 89/336/EEC "EMC compatibility"
C-Tick-Mark
The product series SIMATIC S7- ET 200eco distributed I/O station is compliant
with the standard AS/NZS 2064 (Australia and New Zealand).
ET 200eco Distributed I/O Station
A5E00158716-02
iii