I/O Module Accessories - Order Numbers; Accessories For The Ecofast Terminal Block - Order Numbers - Siemens SIMATIC ET 200eco Manual

Order numbers
I/O module accessories
Table A-3
M12 caps
Y connector M12, 5–pin (for dual connection of actuators
and sensors to digital inputs/outputs.
Angled coupler plug M12, 5–pin (for connecting actuators or
sensors; not for use with Y connector M12)
User–specific configuration of the sensor/actuator cable:
•
Coupler plug M12
Accessories for the ECOFAST Terminal block
Table A-4
Configuration plug (1 piece) for setting the
PROFIBUS address (replacement part)
ECOFAST hybrid prefabricated cable (2 and 2x2 copper
conductors, ∅ 1.5 mm
connector:
ECOFAST terminating resisitor for PROFIBUS DP
For user–specific configuration of the hybrid cable:
•
PROFIBUS ECOFAST Hybrid Plug 180 (ECOFAST Cu,
5–piece package)
A-2
I/O module accessories – Order numbers
Description
Accessories for the ECOFAST terminal block – Order numbers
Description
2
) of various lengths, with ECOFAST
Pin insert (for loop–through)
Socket insert (for power supply)
Order no.
3RX9 802-0AA00
6ES7 194-1KA01-0XA0
on request
on request
Order no.
6ES7 194-1KB00-0XA0
1.5 m 6XV1 830-7BH15
3.0 m 6XV1 830-7BH30
5.0 m 6XV1 830-7BH50
10.0 m 6XV1 830-7BN10
15.0 m 6XV1 830-7BN15
20.0 m 6XV1 830-7BN20
25.0 m 6XV1 830-7BN25
30.0 m 6XV1 830-7BN30
35.0 m 6XV1 830-7BN35
40.0 m 6XV1 830-7BN40
45.0 m 6XV1 830-7BN45
50.0 m 6XV1 830-7BN50
1 unit 6GK1 905-0DA10
5 units 6GK1 905-0DA00
6GK1 905-0CA00
6GK1 905-0CB00
ET 200eco Distributed I/O Station
A5E00158716-02