Route Pattern For Calls Within The Cpe; Automatic Alternate Routing (Aar) Dialing - Avaya Aura Communication Manager 7.1 Application Notes

change private-numbering 0
Ext Ext
Len Code
5 10
5 11
5 12
5 14
5 20

6.12. Route Pattern for Calls within the CPE

This form defines the Route pattern for the local SIP trunk, based on the route-pattern selected by
the AAR table in Section 6.13 (e.g., calls to Avaya SIP telephone extensions or Messaging).
Step 1 - Enter the change route-pattern 3 command and enter the following:
 In the Grp No column enter 3 for SIP trunk 3 (local trunk).
 In the FRL column enter 0 (zero).
 In the Numbering Format column, across from line 1, enter lev0-pvt.
change route-pattern 3
SCCAN? n Secure SIP? n
Primary SM: SM
Grp FRL NPA Pfx Hop Toll No.
No Mrk Lmt List Del
1: 3 0
2:
3:
BCC VALUE TSC CA-TSC
0 1 2 M 4 W
1: y y y y y n n

6.13. Automatic Alternate Routing (AAR) Dialing

AAR is used for outbound calls within the CPE.
Step 1 - Enter the change aar analysis 0 command and enter the following:
 Dialed String - In the reference configuration all SIP telephones used extensions in the
range 14xxx, therefore enter 14.
 Min & Max – Enter 5
 Route Pattern – Enter 3
 Call Type – Enter lev0
Step 2 - Repeat Step 1, and create an entry for Messaging access extension (not shown).
change aar analysis 0
Dialed
String
14
DDT; Reviewed:
SPOC 10/18/2017
NUMBERING - PRIVATE FORMAT
Trk Private
Grp(s) Prefix
3
3
3
3
3
Pattern Number: 3
Used for SIP stations? y
Secondary SM:
Inserted
Digits
Dgts
ITC BCIE Service/Feature PARM Sub
Request
rest
AAR DIGIT ANALYSIS TABLE
Location: all
Total Route
Min Max Pattern
5 5 3
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
Total
Len
5 Total Administered: 6
5 Maximum Entries: 540
5
5
5
Pattern Name: ToSM Enterprise
Dgts Format
Percent Full: 1
Call Node ANI
Type Num Reqd
lev0 n
Page 1 of 2
Page 1 of 3
DCS/ IXC
QSIG
Intw
n user
n user
n user
Numbering LAR
lev0-pvt none
Page 1 of 2
52 of 95
CM71SM71-VzIPCC