Avaya Aura® Communication Manager Sip Entity - Local Trunk; Avaya Session Border Controller For Enterprise Sip Entity; Avaya Aura® Messaging Sip Entity; Entity Links - Avaya Aura Communication Manager 7.1 Application Notes

5.4.3 Avaya Aura® Communication Manager SIP Entity – Local Trunk
To configure the Communication Manager Local trunk SIP Entity, repeat the steps in Section 5.4.2
with the following changes:
 Name – Enter a descriptive name (e.g., CM-TG3).
 Adaptations – Leave this field blank.

5.4.4 Avaya Session Border Controller for Enterprise SIP Entity

Repeat the steps in Section 5.4.2 with the following changes:
 Name – Enter a descriptive name (e.g., SBC1).
 FQDN or IP Address – Enter the IP address of the A1 (private) interface of the
Avaya SBCE (e.g., 10.64.91.50, see Section 7.5.1).
 Type – Select SIP Trunk.
 Adaptations – Select Adaptation SBC1-Adaptation for Verizon (Section 5.3.2).
5.4.5 Avaya Aura® Messaging SIP Entity
Repeat the steps in Section 5.4.2 with the following changes:
 Name – Enter a descriptive name (e.g., Aura Messaging).
 FQDN or IP Address – Enter the IP address of Messaging (e.g., 10.64.91.54).
 Type – Select Messaging.
 Adaptations – Leave this field blank.

5.5. Entity Links

In this section, Entity Links are administered for the following connections:
 Session Manager to Communication Manager Public trunk (Section 5.5.1).
 Session Manager to Communication Manager Local trunk (Section 5.5.2).
 Session Manager to Avaya SBCE (Section 5.5.3).
 Session Manager to Messaging (Section 5.5.4).
Note – Once the Entity Links have been committed, the link information will also appear on the
associated SIP Entity pages configured in Section 5.4.
Note – See the information in Section 5.4 regarding the transport protocols and ports used in the
reference configuration.
5.5.1 Entity Link to Avaya Aura® Communication Manager – Public Trunk
Step 1 - In the left pane under Routing, click on Entity Links, then click on New (not shown).
Step 2 - Continuing in the Entity Links page, provision the following:
 Name – Enter a descriptive name for this link to Communication Manager (e.g., SM to
CM TG2).
 SIP Entity 1 – Select the SIP Entity administered in Section 5.4.1 for Session Manager
(e.g., SessionManager).
 Protocol – Select TLS (see Section 6.8.1).
DDT; Reviewed:
SPOC 10/18/2017
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
25 of 95
CM71SM71-VzIPCC