Elevator → Camber mixing
ELE → CAMBR
Function
This function is used when you want to mix the
camber flaps with elevator operation. When used,
the flaps are lowered by up elevator, and lift is
increased.
flap is down
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
+
(1 second)
Mixing rate
● Aileron1
● Aileron2
● Camber MIX ACT/INH
● Can be either set to a
switch or when NULL is
always active.
Mixing rate
● Flap1
● Flap2
● Flap3
● Flap4
WING TYPE
● In-flight mixing can be turned ON/OFF by assigning
● The mixing rate can be adjusted.
● Setting so that the flaps are not operated near the
Up the elevator
"ELE → CAMBR"
② Select
from the menu with the
Jog key.
(Currently selected condition)
ELE→CAMBR
(NORM)
(RATE1)
(RATE2)
AIL1 ▶
0
▶
AIL2 ▶
0 ▶
MIX ▶ INH
SW ▶ SwA ▶ DOWN
RANGE▶
0% (
● Described on
● Current position of the
the next page.
[ELE → Camber 2page]
(Currently selected condition)
ELE→CAMBR
(NORM)
(RATE1)
(RATE2)
FLP1 ▶
0
▶
FLP2 ▶
0 ▶
FLP3 ▶
0 ▶
FLP4 ▶
0 ▶
1AIL 2AIL 2AIL+1F 2AIL+2F 2AIL+4F
this to a switch. (Always ON at SW [NULL] setting)
center of the elevators is possible. (RANGE)
Aileron1
(CH1)
Flap1
Flap3
(Camber Flap)
(Brake Flap)
Flap4
(CH5)
(CH8)
(Brake Flap)
(CH9)
Elevator
(CH2)
③ Open the setting screen by
pressing the Jog key.
1
2
● Select the setting item
with the Jog key.
0
+
0
0%)
● The number is changed
by + key or – key.
elevator stick
1
2
● (RATE1) and (RATE2) show
the direction of elevator of
operation.
0
0
0
0
(GLIDER)
Aileron2
Flap2
(CH7)
(Camber Flap)
(CH6)
-
163