Table of Contents
Advertisement
Rudder → Aileron
RUD → AIL
Function
This function is used when you want to mix
the ailerons with rudder input. It is used when
rudder is applied during roll maneuvers such
as, knife edge flight. It can be used to turn or
bank scale models, large models, etc. like a full-
size aircraft.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Activating the function
Mixing rate
● Select the setting item
with the Jog key.
● Switch ON/OFF 表示
3
Position Switch
NULL
UP
UP&DWN
ON
ON
ON
ON
OFF
OFF
ON
OFF
ON
2
Position Switch
NULL
UP
DOWN
ON
OFF
ON
ON
OFF
ON
RUD → AIL
■ Activating the function
① Select the "MIX" item and then select
the "ON" by pressing the + key or –
key.
＋
● When you do not use a function, set
to the "INH" side.
158
WING TYPE
② Select
from the menu with the
Jog key.
RUD→AIL
MIX
▶
INH
RATE ▶
0% (NORM)
SW ▶ SWA
POSI▶ DOWN
UP&CNT
CENTER
CNT&DN
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
■ Mixing rate
② S e l e c t t h e " R AT E " i t em a n d
－
or
1AIL 2AIL 2AIL+1F 2AIL+2F 2AIL+4F
●When the mixing direction is reversed by the
linkage, adjustments can be made by changing
the rate polarity.
"RUD → AIL"
③ Open the setting screen by
● When condition was used, the display
● The ON/OFF switch can be changed.
(Selected by Jog key and changed by
+ key.)
DOWN
● Sets the ON/OFF direction of the
OFF
OFF
selected switch.
ON
then adjust the mixing rate by
pressing the + key or – key.
Range：-100 ～ +100%
Default：0%
● When you want to return the set value to the initial value,
press the + key and – key simultaneously.However,
polarity does not return.
(GLIDER)
pressing the Jog key.
● When not using this function,
select INH.
can be switched and each connection
can be set by switching the condition
switch.
＋
－
or
Advertisement
Table of Contents
