Mr Configurator2; Restrictions; Using The Parallel Drive System - Mitsubishi Electric Melservo-J4 MR-J4-DU*B4-RJ100 Series Instruction Manual

8.1

MR Configurator2

The MR-J4-DU_B4-RJ100 drive unit can be used with MR Configurator2 with software version 1.60N or later.
This section provides descriptions specific to the parallel drive system. For other details, refer to section 11.7 in "MR-J4-_B_(-
RJ) Servo Amplifier Instruction Manual".

Restrictions

For parallel drive systems, the following functions are unavailable.
Item
Test operation
Adjustment

Using the parallel drive system

To use the parallel drive system, the model name of a servo amplifier must be registered in MR Configurator2. Register the
model name in the following procedure.
1.
Start MR Configurator2, click "Tools" in the menu bar, and then click "Update Parameter Setting Range".
8 OPTIONS AND PERIPHERAL EQUIPMENT
62
8.1 MR Configurator2
Description
Jog mode, positioning mode, motor-less operation, DO forced output, and program operation, test mode information
One-touch tuning and machine analyzer