Virtual-System - HP 6127XLG Series Command Reference Manual

Predefined user roles
network-admin
Parameters
seconds: Specifies the LSP refresh interval in the range of 1 to 65534 seconds.
Usage guidelines
Each VTEP updates the LSPs that they generated at the LSP refresh interval to maintain LSDB consistency
across the VXLAN network.
To avoid unnecessary LSP age-outs at remote VTEPs, make sure the LSP refresh interval is shorter than the
LSP lifetime.
Examples
# Set the LSP refresh interval to 1500 seconds.
<Sysname> system-view
[Sysname] vxlan-isis
[Sysname-vxlan-isis] timer lsp-refresh 1500
Related commands
display vxlan isis brief
•
• timer lsp-max-age

virtual-system

Use virtual-system to create a VXLAN IS-IS virtual system.
Use undo virtual-system to delete a VXLAN IS-IS virtual system.
Syntax
virtual-system systemid
undo virtual-system systemid
Default
No VXLAN IS-IS virtual systems exist.
Views
VXLAN IS-IS view
Predefined user roles
network-admin
Parameters
systemid: Specifies a virtual system ID in the XXXX.XXXX.XXXX format. Each X represents a hexadecimal
digit.
Usage guidelines
The virtual system ID must be unique in the network.
The VXLAN IS-IS process sends all local MAC reachability information in one LSP. By default, an LSP can
convey a maximum of 55 x 2 MAC address entries.
10
60