Display Vxlan Isis Tunnel - HP 6127XLG Series Command Reference Manual

Blade switch
Hide thumbs Also See for 6127XLG Series:
Table of Contents

Advertisement

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vxlan-id: Specifies a remote VXLAN ID in the range of 0 to 16777215. If you do not specify a VXLAN, the
command displays information about all VXLANs.
count: Displays the number of remote VXLANs that match the command.
Examples
# Display information about all VXLANs.
<Sysname> display vxlan isis remote-vxlan
VXLAN Flags: S-VXLAN supported at the local end
VXLAN ID: 10000
Flags: FS
Tunnel: 1
<Sysname> display vxlan isis remote-vxlan count
1 remote VXLANs found.
Table 18 Command output
Field
Tunnel
Flags

display vxlan isis tunnel

Use display vxlan isis tunnel to display VXLAN IS-IS settings on VXLAN tunnel interfaces.
Syntax
display vxlan isis tunnel [ tunnel-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
F-Association between VXLAN and Tunnels has been flushed to L2VPN
Description
VXLAN tunnels assigned to the VXLAN.
VXLAN flag:
S—The local end supports the VXLAN.
F—The associations between the VXLAN and tunnels have been flushed to
L2VPN.
N/A—The local end does not support the VXLAN.
49

Advertisement

Table of Contents
loading

Table of Contents