Ovsdb Server Pssl - HP 6127XLG Series Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
key-filename: Specifies the key file name, a case-insensitive string. The file name cannot contain the slot
string.
Usage guidelines
You must specify a key file for establishing active or passive OVSDB SSL connections.
This command takes effect after you execute the ovsdb server enable command.
Examples
# Specify a key file for SSL.
<Sysname> system-view
[Sysname] ovsdb server private-key flash:/ovsclient-privkey.pem

ovsdb server pssl

Use ovsdb server pssl to enable the device to listen for OVSDB SSL connection requests.
Use undo ovsdb server pssl to disable the device to listen for OVSDB SSL connection requests.
Syntax
ovsdb server pssl port [ port-number ]
undo ovsdb server pssl
Default
The device does not listen for OVSDB SSL connection requests.
Views
System view
Predefined user roles
network-admin
Parameters
port-number: Specifies a port on which the device listens for OVSDB SSL connection requests. The value
range for the port-number argument is 1 to 65535. If you do not specify a port, the device uses the
default port number 6640.
Usage guidelines
The device can listen for OVSDB SSL connection requests on only one port. If you execute this command
multiple times, the most recent configuration takes effect.
Before you use this command, specify a key file, certificate file, and CA certificate file for SSL.
This command takes effect after you execute the ovsdb server enable command.
Examples
# Enable the device to listen for OVSDB SSL connection requests on port 6632.
64