Default
The IGMP host function is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
For this command to take effect, you must use the multicast routing command to enable IP multicast
routing.
You must configure an interface as an IGMP host if its IP address is the source IP address of multicast
VXLAN packets. The IGMP host function enables the interface to send IGMP reports in response to IGMP
queries before it can receive traffic from a multicast group.
Examples
# Enable IP multicast routing, and then enable the IGMP host function on VLAN-interface 10.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] igmp host enable
Related commands
display igmp host group
•
•
group
multicast routing (IP Multicast Command Reference)
•
l2vpn enable
Use l2vpn enable to enable L2VPN.
Use undo l2vpn enable to disable L2VPN.
Syntax
l2vpn enable
undo l2vpn enable
Default
L2VPN is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
You must enable L2VPN before you can configure L2VPN settings.
16