Vtep Access Port; Vtep Enable - HP 6127XLG Series Command Reference Manual

[Sysname] ovsdb server tcp 10.0.2.15 port 6632

vtep access port

Use vtep access port to specify a site-facing interface as a VTEP access port.
Use undo vtep access port to restore the default.
Syntax
vtep access port
undo vtep access port
Default
An interface is not a VTEP access port.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
For the controller to manage a site-facing interface, you must specify the interface as a VTEP access port.
Examples
# Specify Ten-GigabitEthernet 1/0/1 as a VTEP access port.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] vtep access port

vtep enable

Use vtep enable to enable VTEP mode.
Use undo vtep enable to disable VTEP mode.
Syntax
vtep enable
undo vtep enable
Default
VTEP mode is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
You must enable VTEP mode for the device to exchange information with the controller for VXLAN
configuration.
67