Overlay Isis Timer Lsp; Reserved Vxlan - HP 6127XLG Series Command Reference Manual

Related commands
overlay isis timer hello

overlay isis timer lsp

Use overlay isis timer lsp to set the minimum LSP sending interval and the maximum number of LSPs that
can be sent at each interval.
Use undo overlay isis timer lsp to restore the default.
Syntax
overlay isis timer lsp time [ count count ]
undo overlay isis timer lsp
Default
The minimum LSP sending interval is 100 milliseconds. A maximum of five LSPs can be sent at each
interval.
Views
VXLAN tunnel interface view, NVE tunnel interface view
Predefined user roles
network-admin
Parameters
time: Specifies the minimum LSP sending interval, a multiple of 100 in the range of 100 to 1000
milliseconds.
count count: Specifies the maximum number of LSP segments that can be sent at each interval. The value
range is 1 to 1000.
Usage guidelines
The VTEP generates an LSP update when any LSDB content changes. For example, a MAC address is
removed or added.
Use this command to control the amount of LSP segments that the VTEP sends out. To decrease the
amount of LSP segments, increase the interval and decreases the maximum number of LSP segments sent
at each interval.
Examples
# Set the minimum LSP sending interval to 500 ms.
<Sysname> system-view
[Sysname] interface tunnel 101
[Sysname-tunnel101] overlay isis timer lsp 500
Related commands
display vxlan isis brief

reserved vxlan

Use reserved vxlan to specify a VXLAN for the VTEP to exchange VXLAN IS-IS packets with other VTEPs.
Use undo reserved vxlan to restore the default.
57