HP 6127XLG Series Command Reference Manual page 35

remote client-ip: Specifies the IPv4 address of an ENDP neighbor.
server server-ip: Specifies the IPv4 address of an ENDS.
Usage guidelines
Each ENDP neighbor entry includes the IPv4 address, bridge MAC address, entry creation time, aging
time, and VXLAN tunnel status of a neighbor.
If you do not specify any parameters, this command displays IPv4 neighbor entries that all local ENDCs
have learned.
Examples
# Display IPv4 neighbor entries that all local ENDCs have learned.
<Sysname> display vxlan neighbor-discovery client member
Interface: Tunnel0
Local Address: 20.0.0.2
Server Address: 20.0.1.1
Neighbor
20.0.1.1
20.0.2.1
20.0.3.1
Interface: Tunnel1
Local Address: 21.0.0.1
Server Address: 21.0.1.2
Neighbor
21.0.1.2
21.0.2.1
21.0.3.1
Table 8 Command output
Field
Interface
Network ID
Local Address
Server Address
Neighbor
System ID
Created Time
Expire
Status
Network ID: 1
System ID Created Time
000F-0000-0A3D 2011/01/01 12:12:12
000F-0000-0A3E 2011/01/01 12:12:12
000F-0000-0A3F 2011/01/01 12:12:12
Network ID: 2
System ID Created Time
000F-0000-0A3D 2011/01/01 12:12:12
000F-0000-0A3E 2011/01/01 12:12:12
000F-0000-0A3F 2011/01/01 12:12:12
Description
Name of the ENDC-enabled NVE tunnel interface.
NVE tunnel network ID.
Source IP address of the NVE tunnel.
IPv4 address of the ENDS. This field displays NA if the ENDS is unknown.
IPv4 address of the neighbor learned from the ENDS.
Bridge MAC address of the neighbor. This field displays NA if the bridge MAC address is
unknown,
Time when the neighbor entry was created.
Remaining lifetime (in seconds) of the neighbor entry.
Status of the VXLAN tunnel to the neighbor:
•
Up—The VXLAN tunnel is up.
•
Down—The VXLAN tunnel is down.
•
NA—No VXLAN tunnel has been set up with the neighbor.
31
Expire Status
13 Up
13 Up
12 Up
Expire Status
25 Up
25 Up
19 Up