Group - HP 6127XLG Series Command Reference Manual

Use undo flooding disable to restore the default.
Syntax
flooding disable
undo flooding disable
Default
Flooding is enabled for a VSI.
Views
VSI view
Predefined user roles
network-admin
Usage guidelines
By default, the device floods unknown unicast frames received from the local site to the following
interfaces in the frame's VXLAN:
All interfaces in the local site except for the incoming interface.
•
All VXLAN tunnel interfaces.
•
To limit unknown unicast traffic to the local site, use this command to disable the flooding function for the
VSI bound to the VXLAN. The VSI will not flood unknown unicast frames to VXLAN tunnel interfaces.
Examples
# Disable flooding for the VSI vsi1.
<Sysname> system-view
[Sysname] vsi vsi1
[Sysname-vsi-vsi1] flooding disable

group

Use group to assign a VXLAN a multicast group address for flood traffic, and specify a source IP address
for multicast VXLAN packets.
Use undo group to restore the default.
Syntax
group group-address source source-address
undo group group-address source source-address
Default
A VXLAN uses unicast mode (head-end replication) for flood traffic. No multicast group address or
source IP address is specified for multicast VXLAN packets.
Views
VXLAN view
Predefined user roles
network-admin
14