Flooding Disable - HP 6127XLG Series Command Reference Manual

Views
Ethernet service instance view
Predefined user roles
network-admin
Parameters
default: Matches any frames.
tagged: Matches any frames that have an 802.1Q VLAN tag.
untagged: Matches any frames that do not have an 802.1Q VLAN tag.
s-vid vlan-id: Matches frames that are tagged with the specified outer 802.1Q VLAN ID. The vlan-id
argument specifies a 802.1Q VLAN ID in the range of 1 to 4094. If the outer 802.1Q VLAN is not the
PVID, the matching result does not differ, whether or not you specify the only-tagged keyword. If the outer
802.1Q VLAN is the PVID, the matching result depends on whether or not the only-tagged keyword is
specified.
only-tagged: Matches only PVID-tagged frames. To match both untagged frames and PVID-tagged
frames, do not specify this keyword.
Usage guidelines
The match criterion in each Ethernet service instance on an interface must be unique. For example, you
cannot configure the encapsulation tagged command in one Ethernet service instance if another Ethernet
service instance already contains this command. You cannot use the encapsulation s-vid vlan-id
command to specify the same 802.1Q VLAN ID for any two Ethernet service instances on the interface.
An Ethernet service instance can contain only one match criterion. To change the match criterion, you
must remove the original criterion first. When you remove the match criterion in an Ethernet service
instance, the mapping between the service instance and the VSI is removed automatically.
If the Ethernet service instance uses the default, tagged, or untagged frame match criterion, the access
mode set by the xconnect vsi command does not take effect. The VSI uses Ethernet access mode to
process traffic.
An SDN transport network uses a controller to deploy and manage VXLANs on VTEPs. If you change the
matching outer VLAN ID on the VTEP, you must also modify the VLAN ID set by the Set-Field action on the
controller.
Examples
# Configure Ethernet service instance 1 on Ten-GigabitEthernet 1/0/1 to match frames that have an
802.1Q VLAN ID of 1 1 1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] service-instance 1
[Sysname-Ten-GigabitEthernet1/0/1-srv1] encapsulation s-vid 111
Related commands
display l2vpn service-instance

flooding disable

Use flooding disable to disable flooding for a VSI.
13