Identification - ABB RELION 670 Series Applications Manual

Section 16
Monitoring
16.7.1

Identification

Function description
Logical signal status report
16.7.2 Application
The Logical signal status report (BINSTATREP) function makes it possible for a SPA master to poll
signals from various other function blocks.
BINSTATREP has 16 inputs and 16 outputs. The output status follows the inputs and can be read
from the local HMI or via SPA communication.
When an input is set, the respective output is set for a user defined time. If the input signal
remains set for a longer period, the output will remain set until the input signal resets.
INPUTn
OUTPUTn
IEC09000732 V1 EN-US
Figure 87: BINSTATREP logical diagram
16.7.3 Setting guidelines
The pulse time
can be set or reset individually, but the pulse time will be the same for all outputs in the entire
BINSTATREP function.
16.8 Limit counter L4UFCNT
16.8.1 Identification
Function description
Limit counter
240
IEC 61850
identification
BINSTATREP
t
t is the only setting for the Logical signal status report (BINSTATREP). Each output
IEC 61850
identification
L4UFCNT
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
t
IEC09000732-1-en.vsd
IEC 60617 ANSI/IEEE C37.2
identification device number
-
1MRK 511 364-UUS A
GUID-E0247779-27A2-4E6C-A6DD-D4C31516CA5C v3
GUID-F9D225B1-68F7-4D15-AA89-C9211B450D19 v2
GUID-BBDA6900-4C1A-4A7C-AEA5-3C49C2749254 v2
GUID-22E141DB-38B3-462C-B031-73F7466DD135 v1
GUID-F3FB7B33-B189-4819-A1F0-8AC7762E9B7E v2
Application manual