Trip Matrix Logic Tmagapc - ABB RELION 670 Series Applications Manual

1MRK 511 364-UUS A
tTripMin : Sets the required minimum duration of the trip pulse. It should be set to ensure that the
breaker is tripped correctly. Normal setting is
tWaitForPHS : Sets a duration after any of the inputs 1PTRZ or 1PTREF has been activated during
which a phase selection must occur to get a single phase trip. If no phase selection has been
achieved a three-phase trip will be issued after the time has elapsed.
15.2

Trip matrix logic TMAGAPC

15.2.1 Identification
Function description
Trip matrix logic
15.3 Logic for group alarm ALMCALH
15.3.1 Identification
Function description
Logic for group alarm
15.3.2 Application
Group alarm logic function ALMCALH is used to route alarm signals to different LEDs and/or
output contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the alarm signal to
physical tripping outputs according to the specific application needs.
15.3.3 Setting guidelines
Operation : Enabled or Disabled
Application manual
0.150s .
IEC 61850 IEC 60617
identification identification
TMAGAPC -
IEC 61850 IEC 60617
identification identification
ALMCALH -
ANSI/IEEE C37.2
device number
-
GUID-64EA392C-950F-486C-8D96-6E7736B592BF v1
GUID-64EA392C-950F-486C-8D96-6E7736B592BF v1
ANSI/IEEE C37.2
device number
-
GUID-70B268A9-B248-422D-9896-89FECFF80B75 v1
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
Section 15
Logic
IP15121-1 v4
SEMOD167882-2 v3
203