Logic For Group Alarm Wrncalh - ABB RELION 670 Series Applications Manual

Section 15
Logic
15.4

Logic for group alarm WRNCALH

15.4.1 Logic for group warning WRNCALH
15.4.1.1 Identification
Function description
Logic for group warning
15.4.1.2 Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/or output
contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt the warning
signal to physical tripping outputs according to the specific application needs.
15.4.1.3 Setting guidelines
OperationEnabled or Disabled
15.5 Logic for group indication INDCALH
15.5.1 Logic for group indication INDCALH
15.5.1.1 Identification
Function description
Logic for group indication
15.5.1.2 Application
Group indication logic function INDCALH is used to route indication signals to different LEDs
and/or output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the indication signal
to physical outputs according to the specific application needs.
15.5.1.3 Setting guidelines
Operation : Enabled or Disabled
204
IEC 61850 IEC 60617
identification identification
WRNCALH -
IEC 61850 IEC 60617
identification identification
INDCALH -
1MRK 511 364-UUS A
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v3
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v3
ANSI/IEEE C37.2
device number
-
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v3
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v3
ANSI/IEEE C37.2
device number
-
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
GUID-7E776D39-1A42-4F90-BF50-9B38F494A01E v2
Application manual