Setting Guidelines - ABB RELION 670 Series Applications Manual

1MRK 511 364-UUS A
If the IED is connected to a station bus (IEC 61850-8-1), the disturbance recorder (record made and
fault number) and the fault locator information are available as GOOSE or Report Control data. The
same information is obtainable if IEC60870-5-103 is used.
16.6.3

Setting guidelines

The setting parameters for the Disturbance report function DRPRDRE are set via the local HMI or
PCM600.
It is possible to handle up to 40 analog and 128 binary signals, either internal signals or signals
coming from external inputs. The binary signals are identical in all functions that is, Disturbance
recorder (DR), Event recorder (ER), Indication (IND), Trip value recorder (TVR) and Sequential of
events (SOE) function.
User-defined names of binary and analog input signals is set using PCM600. The analog and binary
signals appear with their user-defined names. The name is used in all related functions
(Disturbance recorder (DR), Event recorder (ER), Indication (IND), Trip value recorder (TVR) and
Sequential of events (SOE)).
Figure 86
blocks. Sequential of events (SOE), Event recorder (ER) and Indication (IND) uses information from
the binary input function blocks (BxRBDR). Trip value recorder (TVR) uses analog information from
the analog input function blocks (AxRADR),. Disturbance report function acquires information
from both AxRADR and BxRBDR.
Analog signals
Binary signals
ANSI09000337 V2 EN-US
Figure 86: Disturbance report functions and related function blocks
Application manual
shows the relations between Disturbance report, included functions and function
AxRADR
BxRBDR
Disturbance Report
DRPRDRE
Trip value rec
Disturbance
recorder
Sequential of
events
Event recorder
Indications
ANSI09000337-2-en.vsd
Section 16
Monitoring
IP14874-1 v1
M12179-64 v6
235