FAM3200 ARMORED VARIABLE AREA PURGEMETER | CI/FAM3200-EN REV. D
2 Functional description
The flowmeters in the FAM3200 work according to the float
principle.
The position of the float in the conical meter tube is proportional
to the flow.
A magnet in the float translates the height of the float as a
measurement for the flow to the decouple-proof magnet
follower system of the flowmeter.
The flow rate value is indicated on a scale by a pointer mounted
on a rotating shaft.
1 Measuring housing
2 Meter tube
3 Float with magnet
Figure 1: Setup (example)
The devices are used for local indication of the current flow rate
with integrated alarm signalling units as flow rate monitors or
with differential pressure regulators.
The devices are also optionally available with an angular position
transmitter with a 4 to 20 mA output signal.
4 Indicator housing
5 Magnet follower system
6 Cable entry
3 Product identification
Name plate
Name plate
The name plate is located on the indicator housing.
1 Type designation
2 Serial number
3 Ordering number
4 Ambient temperature
5 Measuring medium temperature
Figure 2: Name plate (example)
Note
For information on permissible measuring medium temperature
(T
) see Specification on page 13.
med
6 Maximum flow rate
7 Measuring medium specifications
8 Manufacturer address
9 CE mark
5