Dnp3 Communication Protocol; Application - ABB RELION 650 Series Applications Manual

Section 17
Station communication
REB 207 Private range
REQ 245 Private range
Refer to the tables in the Technical reference manual /Station communication, specifying the
information types supported by the communication protocol IEC 60870-5-103.
To support the information, corresponding functions must be included in the protection IED.
There is no representation for the following parts:
• Generating events for test mode
• Cause of transmission: Info no 11, Local operation
Glass or plastic fibre should be used. BFOC/2.5 is the recommended interface to use
(BFOC/2.5 is the same as ST connectors). ST connectors are used with the optical power as
specified in standard.
For more information, refer to IEC standard IEC 60870-5-103.
17.6

DNP3 Communication protocol

17.6.1

Application

For more information on the application and setting guidelines for the DNP3 communication
protocol refer to the DNP3 Communication protocol manual.
328
1MRK 505 363-UEN A
GUID-EF1F0C38-9FF6-4683-8B10-AAA372D42185 v1
Application manual