Setting Guidelines; Logic For Group Alarm Wrncalh; Identification; Application - ABB RELION 650 Series Applications Manual

Section 14
Logic
14.3.3

Setting guidelines

Operation : On or Off
14.4

Logic for group alarm WRNCALH

14.4.1

Identification

Function description
Logic for group warning
14.4.1.1

Application

Group warning logic function WRNCALH is used to route warning signals to LEDs and/or
output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt the
warning signal to physical tripping outputs according to the specific application needs.
14.4.1.2 Setting guidelines
OperationOn or Off
14.5

Logic for group indication INDCALH

14.5.1 Identification
Function description
Logic for group indication
14.5.1.1 Application
Group indication logic function INDCALH is used to route indication signals to different LEDs
and/or output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the indication
signal to physical outputs according to the specific application needs.
14.5.1.2 Setting guidelines
Operation : On or Off
14.6

Configurable logic blocks

The configurable logic blocks are available in two categories:
270
IEC 61850 IEC 60617
identification identification
WRNCALH -
IEC 61850 IEC 60617
identification identification
INDCALH -
1MRK 505 363-UEN A
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4
ANSI/IEEE C37.2
device number
-
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4
ANSI/IEEE C37.2
device number
-
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
GUID-7E776D39-1A42-4F90-BF50-9B38F494A01E v2
Application manual
IP11009-1 v3