Certificates And Approvals; Ce Mark; Ex Approval; Functional Safety (In Preparation) - Endress+Hauser Levelflex FMP56 Manual

Levelflex FMP56, FMP57

CE mark

Ex approval

Functional Safety (in
preparation)
Marine certificate (in
preparation)

Telecommunications

CRN approval (in preparation)

Other standards and
guidelines
Endress+Hauser

Certificates and approvals

The measuring system meets the legal requirements of the applicable EC guidelines. These are listed in the
corresponding EC Declaration of Conformity together with the standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
The devices are certified for use in hazardous areas and the relevant safety instructions are provided in the
separate "Safety Instructions" (XA) document. Reference is made to this document on the nameplate.
The separate documentation "Safety Instructions" (XA) containing all the relevant explosion protection
data is available from your Endress+Hauser Sales Center. Correlation of documentations to the device
(® ä 51).
Used for level monitoring (MIN, MAX, range) up to SIL 2, independently assessed by TÜV Rhineland as per
IEC 61508. Other information see documentation "Functional Safety Manual".
• GL (Germanischer Lloyd)
• ABS (American Bureau of Shipping)
• NK (Nippon Kaiji Kyokai)
• DNV (Det Norske Veritas)
Only in connection with HART or PROFIBUS PA.
Complies with part 15 of the FCC rules for an unintentional radiator. All probes meet the requirements for a
Class A digital device.
In addition, all probes in metallic tanks as well as the coax probe meet the requirements for a Class B digital
device.
Some device versions have CRN approval. For a CRN-approved device, a CRN-approved process connection
has to be ordered with a CSA approval.
• EN 60529
Degrees of protection by housing (IP code)
• EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures.
• IEC/EN 61326
"Emission in accordance with Class A requirements". Electromagnetic compatibility (EMC requirements)
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with analog output
signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics
• NAMUR NE 107
Status classification as per NE107
• NAMUR NE 131
Requirements for field devices for standard applications
43