Comparison With Competitors - YOKOGAWA Revolution FA-M3 R Technical Information

P L C
P L C
Due to the ultra-fast processing speed, there's no need to
Why is high-speed processing necessary?
• To carry out complicated calculations (with
application instructions) quickly
• To stabilize mechanical control of higher
speed for higher productivity
• To allow human-interface and diagnostic
programs to be enhanced, thus providing an
easier interface for the operator
• To reduce unstable actions during each scan
time by network servicing
* Executed instructions means the average number of instructions executed in 1
Ultra-fast Execution of Instructions
Basic instruction: Min. 0.0175 µs
Application instruction: Min 0.070 µs
Comparison with Yokogawa's Former CPU Module for Basic
Instructions
Instruction
LD, AND, OR
Timer
Transfer
Comparison
Addition, subtraction
Logic operator
Comparison with Yokogawa's Former CPU Module for Application
Instructions
Instruction
Transfer between file registers
Index modification (LD)
Index modification (MOV)
Read/write
Timer update
BMOV/BSET
FOR-NEXT
TI 34M6A01-01E

Comparison with Competitors

consider the processing time when programming.
New SP53
17.5 to 35 ns
175 ns
70 ns
70 ns
105 ns
105 ns
SP58 vs. SP35
74.1 times faster
10.7 times faster
30.4 times faster
6.4 times faster
6.7 times faster
12.8 times faster
7.7 times faster
Comparison of Processing speed
16.00 14.50
14.00
12.00
10.00
8.00
5.62
6.00
3.80
4.00
1.83
2.00
0.00
High-speed PLC CPU
Price: 200,000 to
550,000 yen
µs
by PLC.
Former SP35
90 ns
360 ns
180 ns
180 ns
270 ns
270 ns
3.54
1.52 1.33
0.04 0.02
General PLC CPU
Price: 60,000 to
200,000 yen
4