Scene Save Operation; Scene Recall - Kensence SMC100 Operation Manual

SMC100/200/400/800

6.3-3 Scene save operation

Click the "VIEW" button to pop up the interface as shown in Figure 6.3.6. On the right side
of the interface, click on the scenes you want to save in numbers 1 to 12. Press the "SAVE" button
to move the current matrix. The switching status is saved as a scene, and the three status scenes of
video, USB and audio can be switched back and forth.
Figure 6.3.6 scene save

6.3-4 Scene recall

Click the "SCENE" button to pop up the interface as shown in Figure 6.3.7. Select the scene to
be recalled on the right side of the interface. After selecting, you can view the input and output
conditions of the selected scene in the interface. Finally, click "(recall )" button to call the selected
scene, click video, USB, audio three state scenes can switch back and forth.
16