Distributed Matrix Function - Kensence SMC100 Operation Manual

SMC100/200/400/800
Figure 6.3.15 Plug-in was added successfully

6.3-9 Distributed Matrix Function

Connect this unit with the encoder and decoder to the network switch. Refresh the list to see
the IP of the encoder and decoder. To switch, just select the encoder and decoder IP and click to
switch. As shown in Figure 6.3.16
Figure 6.3.16 Codec switching
To achieve the preview function must be RTSP stream encoder, as shown in Figure 6.3.17, click
the encoder and gateway encoder IP, then click to switch, then click preview.
22