Kensence SMC100 Operation Manual page 22

SMC100/200/400/800
Figure 6.3.9 TV wall configuration
As shown in the above figure, the 4 areas represent 4 display screens. Double-click each area to
set in sequence. If we select "1" for the input signal, double-click the first area and enter "1" in
the input box. Also enter "1", in the output box , double-click on the second block, enter "1" in
the input box, enter "2" in the output box, double-click on the third block, enter "1" in the input
box, and type in the output box "3", double-click the 4th block area, enter "1" in the input box,
and enter "4" in the output box. After the setting is completed, each block has a different color
display, as shown in Figure
6.3.10.
19