Touch Screen Control Instructions - Kensence SMC100 Operation Manual

SMC100/200/400/800
Network: network connection status indicator;
5.7-inch touch screen, through the screen control matrix;

6.2 Touch screen control instructions

The matrix can be controlled by the front panel high-definition touch screen. The touch
interface contains six operating options: "Display, Switch, Scene, Settings, Tools, About Us". As
shown in Figure 6.2.1, click any option to enter The operation interface of this option, after
entering the operation interface, click the button icon of this option again to return to the main
interface.
Figure 6.2.1 matrix touch screen operation main interface
1.Matrix switching operation: In the main interface, click the "Switch" option to enter the input
signal selection interface, as shown in Figure 6.2.2, select the input signal port "15", then the
output port selection interface will pop up, select the output port, Then click "Execute" to switch
successfully, as shown in Figure 6.2.3. (You can select more than one output port at a time.
Clicking the "All" button in the interface will automatically select all the output ports. The
selected port number will be highlighted in red. The output port shown in Figure 6.2.3 is "25,
27,28,29,30").
6