Scene Commands; Hdcp Compliance; Edid Configuration - Kensence KX-HDMI-44 User Manual

6.3.4 Scene Commands

Command
Save[Y].
Recall[Y].
Clear[Y].

6.3.5 HDCP Compliance

Command
/%[Y]/[X]:[Z].
%0801.
%9973.
%9974.

6.3.6 EDID Configuration

The DIP switcher status should be set as 1111 to enable Software EDID management
mode: RS232 control or Web-based GUI control.
Command
EDIDH[x]B[y].
Function
Save the present operation to the
preset command [Y], ranges from 1 to
10.
Recall the preset command [Y].
Clear the preset command [Y].
Function
HDCP management command.
Y=O is for output;
X=1~4 is the number of the port, if the
X=ALL, it means all ports;
Z is for HDCP compliant status, the
value may be 1 (HDCP compliant) or 0
(not HDCP compliant).
Auto HDCP management, activate
carrier native mode
Query the HDCP status of the input
signals.
Query the HDCP status of the output
signals.
Function
Input port [y] learns the EDID from
output port [x].
If the EDID data is available and the
audio part supports not only PCM
mode, then force-set it to support
PCM mode only. If the EDID data is
4K 4x4 HDMI2.0 Matrix Switcher
12
Out 4 1920x1080P
Feedback Example
Save To
(Y=1-10)
Recall From
(Y=1-10)
Clear
(Y=1-10)
Feedback Example
/%O/ALL:0.
%0801
In 01 02 03 04
HDCP Y N Y N
Out 01 02 03 04
HDCP Y N Y N
Feedback Example
EDIDH1B1
FY
FY
FY