Kensence SMC100 Operation Manual page 11

SMC100/200/400/800
the scene first. Select the scene number, and then click "save" or "call" button to complete the
operation, such as save "scene 8" please select the scene number, and then click "save" button can
be, such as calling "scene 11" please select The scene number, and then click the "call" button.
After selecting the scene number, click the "View" button to view the input and output status
of the scene, as shown in Figure 6.2.5, where scene "0" is the current real-time scene of the matrix,
select the scene "0" and click the "View" button to display the current matrix Input and output
status, select the scene number and click the "Clear" button to clear the scene.
Figure 6.2.4 scene save and recall interface
Figure 6.2.5scene input output state interface
2.Matrix setting ： Matrix setting: Click "Settings" option in the main interface to pop up the
matrix setting interface, as shown in Figure 6.2.6. This interface shows the matrix configuration
information, such as input and output port number, serial number, version number, etc. The
8