Version And Production Information - Kensence SMC100 Operation Manual

3)The first input signal is switched to the third, 8th, 15th port output, send the command:
1X3,8,15.take.
4) Switch the 4th, 5th, and 6th input signals to the 21st, 25th, and 33rd port outputs and send the
command: 4X21.5X25.6X33.take.
5)Switch all inputs and outputs in one-to-one correspondence (1 to 1, 2 to 2, 3 to 3 and so on to 40
to 40) Send the command: NXN.Take.
6)Save the current status command: save [Y].
Example: To save the current status to the seventh storage unit, enter "save7."
7)Recall the stored unit instruction: recall [Y].
Example: To recall the status of the 7th storage unit and configure the input/output status, enter
"recall7."
8)Turn on and off the buzzer:
Example: Buzzer on. Turn on the buzzer and hear the beep sound when switching
Buzzer off. Turn off the buzzer and you won't hear a beep when switching

8. Version and production information

Release Notes(Document Number:)
Date Version Number
March V1.01.01
2018
Description
First version
25
SMC100/200/400/800