The Model 5000 Printout - Zeiss Acuitus 5000 User Manual

The Model 5000 Printout

The Acuitus does not store a patient's measurements; you must print them out after each
examination. You may print after each eye is measured, but most practitioners prefer to
have the results for both eyes on a single printout.
The refraction results from the Acuitus 5000 can be printed out in the complete format or
with some or all options suppressed. Use the setup screens to select or suppress options
(see page 5). You may also choose to print results either on the standard paper or on an
adhesive label that may be affixed to the patient's chart.
Zeiss Humphrey Systems Acuitus User Manual
PN 50648 Rev A June 2001
Space to write in the patient's name (optional)
VD (Vertex Distance)
Refraction Results, Right Eye
Multiple sphere, cylinder, and axis measurements for the
right eye (optional)
Average sphere, cylinder, and axis values
Refraction Results, Left Eye
Graphic (optional, shown on page 12). The printout
graphic depicts the focal length of the eye and the position
of the image relative to the retina in a myopic, hyperopic,
myopic-astigmatic, or hyperopic-astigmatic eye,
depending on the patient's refraction. This can be used to
explain the refraction to the patient.
8