Technical Data - OMT FREE.STAND 9029 Installation And Operating Instructions Manual

10

Technical data

System: 9029 FreeStand with SMART motor controller
General
Operating voltage
Nominal voltage
Standby power at nominal voltage,
primary (typical)
Ambient temperature during operation
Permissible relative humidity
(for operation)
Storage and transport temperature
Permissible relative humidity
(for storage)
Protection class
IP Class
Max. operating time
Nominal lift speed of the drive columns
(reduced under max. load)
Individual drive (installation column or side panel, support foot) with SMART-e-2
Lifting capacity max.
Lift length depending on version
Current consumption max., primary
Desk base with 2 drives (installation column or side panels) with SMART-e-2
Lifting capacity max.
Lift length depending on version
Current consumption max., primary
207-253 V / 50-60 Hz
220-230 V / 50-60 Hz
≤0.3 W
0-30°C
5-85% (non-condensing)
-40°C to +85°C
5-90% (non-condensing)
I
IP 20
10% (2 min. on / 18 min. off)
38 mm/s
600 N (≈ 60 kg)
See drawing
216 W
750 N (≈ 75 kg)
See drawing
216 W
24