Table of Contents
Advertisement
4.5.4 Connect the hand-switch
Connect the hand-switch to the 7-pin hand-switch socket (HS)
of the controller.
Note: You can choose from a large number of hand-switches that fit the SMART motor controller!
Please ask Oelschläger Metalltechnik for information on the available types!
4.5.5 Connect the power supply cable /mains cable
Attention: Before you plug in the power supply cable, check again
•
to see if the mains voltage matches the rating plate of your controller.
•
to see if all components are plugged into the correct sockets.
The SMART motor controller is ready for operation as soon as the power supply cable is plugged
in!
Note: Initialisation of the desk base is required the first time the power supply cable is connected
(RESET). This is described in Section 5.
Attention: Use only the supplied mains cable! It is mandatory to provide the SMART motor
controller with a 3-pin mains cable with protective earth.
Attention: Fasten all cables to the desk base or the desktop so they cannot get damaged during
operation.
4.6
Assembly of optional accessories
If you have also ordered an optional cable tray, plug it onto both cross-beams as the last step. Do not
let any cable get jammed in. Route the mains cable left or right out of the cable tray on the side element.
On certain desk versions, assembly of the cable tray is only possible in the upper position of the desk
base. To do that, you must first initialise the desk base!
5
Initialisation / Reset
After assembling or if the desk has been disconnected from the power supply for a long time, malfunctions on
the desk are possible. The same applies if the connection between the drives and the controller was separated.
In these cases, the desk controller has to be initialised.
If the controller expects a reinitialisation, the downward movement of the desk is only possible at reduced
speed. For hand-switch versions with a display, this is indicated in addition by the "Reset LED". It turns off as
soon as initialisation has been successfully concluded.
14
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
