Technical Data - OMT FREE.STAND 9051 Installation And Operating Instructions Manual

11 Technical Data

System: 9051 FREE.STAND with motor controller STAND.CONTROL C1
Rated voltage
Rated current consumption
Rated power
Standby power at nominal voltage,
primary (typical)
Dimensions (L x B x H)
Ambient conditions during operation
Ambient conditions during transport and
storage
weight
Protection class
IP Class
Max. operating time
Individual drive (installation column or side panel, support foot) with STAND.CONTROL C1
Lifting capacity max.
Lift length depending on version
Current consumption max., primary
Desk base with 2 drives (installation column or side panels) with STAND.CONTROL C1
Lifting capacity max.
Lift length depending on version
Current consumption max., primary
9051_Bedienungsanleitung_C1_Rev2_EN_UK – Stand 08.08.2018 TS / MB
100-240 V / 50-60Hz
294 x 89 x 38 mm
11.57" × 3.50" × 1.496"
approx. 500g
II
IP 20
2 Min. ON / 18 Min. OFF
700 N (≈ 70 kg)
see drawing
250 W
850 N (≈ 85 kg)
see drawing
250 W
25