Repairs; Warranty; Maintenance / Cleaning - OMT FREE.STAND 9029 Installation And Operating Instructions Manual

1.5

Repairs

In case of a technical defect on this device, please contact an authorised customer service representative. You
can find solutions for simple faults in Section 7!
Attention: In the interest of preventing malfunctions, only authorised service personnel are
permitted to make any repairs.
Attention: Opening any components of this desk base produces risks for the following
malfunctions.
2

Warranty

We provide a 24-month warranty on this desk base. The warranty covers all material and production errors and
applies from the date of production (see rating plate). The warranty is only valid under the condition that the
desk base has been properly and professionally assembled and has been used within the scope of the
described parameters; that maintenance has been performed correctly and that repairs have been performed
solely by authorised service staff.
The sit/stand desk must not be improperly handled or used and no changes are permitted to be made on the
desk base; otherwise the warranty expires. Please refer to our General Terms and Conditions for additional
information.
3

Maintenance / Cleaning

Regularly remove dust and dirt from the desk base, in particular from the guide tubes, and make sure that there
are no damages and cracks.
Check all fastening screws to make sure they are securely fastened and check all plug connectors, cables and
plugs including proper functioning.
Danger: Clean the controller, actuator and the desk base only with a dry or slightly moist cloth.
Danger to life!
Attention: Aggressive cleaning agents can cause damage or discolourations on the product. Use
only agents with pH-values of 6-8.
Danger: Never let any fluids get into the system (controller, actuator, cable and base). Danger to
life!
9