To exit the menu, wait about 10 seconds until the height display reappears.
6.3.1 9901 1910 Hand-switch with display and memory (optional)
This hand-switch is equipped with a display to indicate the current desk height in centimetres or inches. In
addition, it is possible to save 4 "Memory" positions (desk heights).
The reset LED indicates that initialisation is required (see initialisation section). It stays illuminated until the
initialisation is concluded.
The info LED indicates that the controller has detected a fault. Simultaneously the display shows the "Exx" error
code instead of the current desk height. To repair the error, see the troubleshooting section.
The LED's "Container, Flex, Ergotrainer and Pin" are reserved for optional functions and are not used in
standard systems.
The Up (2) and Down (2) buttons work like the up and down buttons in the standard version
18