raised or cylindrical head. The tightening torque depends on the desktop material, but should not exceed
*1)
2 Nm.
*1)
The screws are not included in the scope of delivery since they have to be selected depending on the
material and the thickness of the desktop.
4.5
Commissioning
Commissioning includes all jobs that are necessary for electrical height adjustment of the FreeStand
sit/stand desk with the aid of the SMART motor controller. The prerequisites for commissioning are:
•
The desk base has been completely assembled as per 4.1 – 4.3
•
The SMART motor controller and the hand-switch are assembled (as explained in Section 4.4)
Danger: Only expert/authorised personnel are allowed to commission the motor controller!
Expert/Authorised personnel have completed the required electrotechnical apprenticeship and are
familiar with these operating instructions.
Attention: Before assembly and commissioning of the FreeStand sit/stand desk, make sure the
product is acclimatised for the temperature and relative humidity values stated in the technical
data!
4.5.1 Connections to the SMART motor controller
12