Table of Contents
Advertisement
6.3.2 9901 1970 Hand-switch with display and memory (optional)
with TOUCH functioning for undertable assembly
This hand-switch has a drawer push function and is equipped with a display to indicate the current desk height
in centimetres or inches. In addition, it is possible to save 4 "Memory" positions (desk heights). A button lock is
integrated to protect against accidental operation.
Note:
of 10 mm and a max. thread diameter of 5 mm for the assembly of this hand-switch.
Note:
assembly screws. The hole clearances must match the assembly holes. Otherwise the housing
could distort and lead to malfunctions of the push function. The correct tightening torque depends
on the type of screw being used and on the desktop material.
Activating and deactivating the display/button lock
You can activate and deactivate the button lock by swiping left or right under the display.
Note:
Note:
Use all 4 provided screws with a cylinder, round or flat head with a max. head diameter
For the assembly, use all provided attachment points. Do NOT overtighten the
The button in the display indicates an activated button lock.
The swiping direction is irrelevant.
Make sure you only swipe lightly over the display without pressing any buttons!
19
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
