OMT FREE.STAND 9029 Installation And Operating Instructions Manual page 6

Before commissioning, make sure the mains voltage on the rating plate of the motor controller
matches your mains voltage!
Danger: This unit can be used by children aged 8 years and above and by persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge when they are
supervised or instructed on the safe use of the device and understand the resulting risks.
Danger: Do not let children play with the device!
Danger: Cleaning and user maintenance must not be carried out by unsupervised children.
Attention: You must use the supplied power supply cable! Make sure that the power supply cable
is not damaged. Operating the FreeStand sit/stand desk with a damaged power supply cable is
prohibited!
Attention: You must disconnect the power supply cable from the mains supply before switching
drives, hand-switches or any other accessories on the motor controller on or off.
Attention: Use solely original FreeStand accessories from Oelschläger Metalltechnik. Use of
components and parts from third parties is prohibited!
Use of unsuitable accessories can lead to damage or the destruction of the desk base.
Attention: In case of a fault (e.g. accidental operation of the desktop such as if a button on the
hand-switch jams), please immediately pull the mains plug!
Danger: Protect the desk base and, in particular, all electrical components on the desk base from
moisture, dripping water and spray water!
Danger: There is a danger of being crushed when the desktop position is changed! For that
reason, make sure no objects and no persons are in the hazardous area and do not reach into the
hazardous area.
The optionally available corrosion protection normally detects solid objects, but there is still
continued danger of crushing for persons! The corrosion protection is a system safeguard and NOT
personal protection!
Attention: Alterations on the components of the desk base including the motor controller and
controls are prohibited!
Danger: The electromotive driven FreeStand sit/stand desk must not be operated in explosive
atmospheres!
Danger: In case of faults it is possible that the desktop moves a bit during every start-up attempt
before the safety shut-down initiates. During this process, always watch out for the possible danger
of being crushed.
6