Table of Contents
Advertisement
Digital Projection E-Vision 6900 Series
Information menu
This menu gives information about software and hardware configuration, input
source and lamp operating times It also allows you to restore the factory default
settings.
Source information
This page provides information about the currently selected input source.
Factory Reset
To restore the factory default settings:
1.
Navigate to
and press
Factory Reset
2.
When prompted, use the
LEFT
the
OK
button and then press
ENTER
Operating Guide
.
ENTER
and
RIGHT
arrow buttons to highlight
to confirm your choice.
USING THE PROJECTOR
Information >>
Model:
E-Vision 6900 WUXGA
Serial Number:
W444AAAAA0000
Software Version 1:
MD00-0000-AA00-AA00
Software Version 2:
SD00-AA00-0000
Filter Time:
00005[H]
Power On Time:
00005[H]
Control / Remote ID:
X / 99
Source Information
Factory Reset
Select Item
[ENTER] Submenu
Information >> Source Information
Active Source:
HDMI 2
Pixel Clock:
74.257 MHz
Signal Format:
720p 59.99 Hz
H/V Refresh Rate:
44.99 kHz / 59.99 Hz
Sync Type:
Separate Sync
Sync Polarity:
H:(+) V:(+)
Scan Type:
Non-Interlace
Reset Everything ?
OK
8
Execute
[EXIT] Back
[EXIT] Back
Cancel
Notes
Rev A February 2017
page 49
Advertisement
Table of Contents
