Service Menu; Factory Reset - Digital Projection M-Vision Cine LED User Manual

4. Controlling the projector

Service menu

• To display the menus, press MENU
control panel.
• Use the and keys to select the Service menu page,
The first eight items are for information only, and cannot be changed.
• To select a menu item, use the

Factory Reset

• Press ENTER or SELECT to request a Factory Reset.
The following message will be displayed.
• Use the and keys to select from:
Yes all settings will be restored to factory defaults
No
Press ENTER or SELECT to confirm your choice.
Page 4.26
on the remote control or the projector
and keys until the item is highlighted.
Digital Projection
M-Vision Cine LED
User Manual
Notes
To select a different menu,
press MENU once or
twice, so that no items are
highlighted, then use the the
and keys to select a
different page.
To exit from the menus
completely, you may need to
press up to three times.
Restore Defaults will restore
all settings to factory
defaults.
If you are not sure this is
what you want to do, then
either:
make a record of all settings
first
or
select No, then press ENTER or
SELECT
Rev E October 2014