Service Menu; Factory Reset - Digital Projection M-Vision 930 Series User Manual

Digital Projection
M-Vision 930 Series

Service menu

This menu gives information about software and hardware configuration, input
source and lamp operating times. It also allows you to restore the factory default
settings.

Factory Reset

To restore the factory default settings:
1. Navigate to Factory Reset and press
2. When prompted, use the LEFT
Yes button and then press
ENTER
Rev A January 2014
ENTER / SELECT .
and RIGHT arrow buttons to highlight the
/ to confirm your choice.
SELECT
USING THE PROJECTOR
SERVICE >>
Model Name : M–Vision WUXGA 930–3D
Serial Number : W343AGFCY0002
Software Version 1 : ME11–GE04–8B05–011D
Software Version 2 : LE03–RE01–3C3C
FPGA Version : 2.0–1.0_4.0–2.0
Active Source : HDMI1
Signal Format : 1080p/60Hz
67.39KHz/60.00Hz/148.50MHz
Lamp1 Run Time : 76 HRS
Lamp2 Run Time : 76 HRS

Factory Reset

Select Item [Enter] Execute
Reset Everything
Yes
< Execute >
[Menu] Return
No
Operating Guide
Notes
61