Specifications - Sartorius PMA.Power Series Operating Instructions Manual

Specifications

Model
Weighing Capacity
Readability
Tare range (subtractive)
Linearity
Stability range (configurable in menu)
Humidity class
Permissible ambient operating temperature range
IP protection
Load plate dimensions
Scale housing (WxDxH)
Net weight, approx.
External calibration weight
Interface
Format
Parity
Transmission rates
Handshake
Power consumption
Mains Connection
Voltage frequency
Device ID (explosion protection) II 2G Ex ia IIC T4 Gb
DEKRA 12ATEX0180 X The terminal/control panel is
suitable for use in potentially explosive areas in
accordance with Directive 94/9/EC
Ambient conditions
Environment
Ambient temperature: Storage and shipping
Ambient temperature: Operation
Highest relative humidity:
Safety of electrical equipment
Electromagnetic compatibility
Defined immunity to interference:
Limitation of emissions:
PMA 35001-X
g 35000
g 0.1
g -35000
g
≤±0,2
Digit 0.25 to 4
F non-condensing
°C 0 to +40
IP 43, in accordance with EN60529/IEC60529
mm 350 + 240
mm 350 + 243 + 132,5
kg 11.4
kg 10 (accuracy class F2 or better)
RS232
7-bit ASCII, 1 start bit, 1 or 2 stop bits
Even, odd, none
1200 to 38,400 bps
Software or hardware
VA Average: 8, max. 16
V 100 – 240 V ~
Hz 50 – 60
Zone1 (devices in category 2)
For indoor use only
-10 °C ... +60 °C
0 °C ... +40 °C
80 % for temperatures up to 31 °C, decreasing linearly up to
50 % relative humidity for 40 °C
as per EN 61010-1:2010
Safety requirements for electrical equipment for
measurement, control, and laboratory use — Part 1:
General requirements
as per EN 61326-1:2006
Electrical equipment for measurement, control, and labora-
tory use — EMC requirements — Part 1: General requirements
Industrial areas
Class B: Suitable for use in residential areas and areas that
are directly connected to a low voltage network
Specifications
Operating Instructions PMA 35001-X
27