Sartorius PMA.Power Series Operating Instructions Manual page 21

Configuring the Text Length ("LONG" or "SHORT")
You can define the length of the operator guidance texts shown on the display.
Level 1 Level 2
SETUP
EXTRAS
Resetting the Scale ("RESET")
You can restore the factory settings on the scale.
Note:
If you have activated the password function, this feature is password-protected.
Level 1 Level 2
SETUP
RESET
Code Settings
Select the "CODES" setting to have menu items identified by numeric codes (1.1.1.1.) rather than texts.
Level 1 Level 2
LANGUAGE
GERMAN
etc.
o CODES
Note:
Contact your local Sartorius office for a detailed list of the menu codes.
Level 3 Level 4
TEXTS
LONG
o SHORT
Level 3 Level 4
MENU
YES
o NO
Menu Settings
Setting
Press the L key [ENTER]
Use the RS keys to select "EXTRAS"
Press the L key [ENTER]
Use the RS keys to select "TEXTS"
Press the L key [ENTER]
Use the RS keys to select "SHORT"
and press L to confirm
Press the c key (Clear) repeatedly
to exit the menu
Setting
Press the L key [ENTER]
Use the RS keys to select "RESET"
Press the L key [ENTER]
Use the RS keys to select "MENU"
Press the L key [ENTER]
Use the RS keys to select "YES"
Press the L key; factory settings are
restored and "MENU" is displayed
Press the c key (Clear) repeatedly
to exit the menu
Setting
Press the R key to select "LANGUAGE"
Press the L key [ENTER]
Use the RS keys to select "CODES"
Press the L key [ENTER]; o indicates
the active setting
Press the c key (Clear) repeatedly
to exit the menu
Operating Instructions PMA 35001-X
21