Sartorius PMA.Power Series Operating Instructions Manual page 20

Menu Settings
20
Operating Instructions PMA 35001-X
Configuring Password Protection
In addition to the LOCK function, you can configure password protection for additional security.
With this feature, the LOCK function can be deactivated only by entering the valid password.
The password is numeric and can have up to 6 digits. Use the RS keys to select the digits
(0 through 9) for your password. The password is hidden on the display; only dashes ("------") are
shown. The first dash flashes to prompt input. Press the RS keys to select the desired digit (0 to 9)
and then press the L key [ENTER]. The digit is stored and the second dash flashes on the display.
Repeat the input procedure as described for the first digit. To store a space as a character in the
password, press the L key [ENTER] while the corresponding dash is flashing.
Once all 6 characters have been stored, press the L key [ENTER] to enter the password.
Note:
Keep a copy of your password in a safe place.
The LOCK function can be deactivated only with this password.
Level 1 Level 2
INPUT
PASSWORD
Changing the Password
To define a new password, the existing password must first be entered correctly under "PASSWORD."
"PW.OLD" prompts this input. Once the old password is entered correctly, the "PW.NEW" prompt is
shown automatically. Enter the new password or press L at each position to confirm.
The display shows spaces.
Note:
Entering 6 spaces deletes the password, which deactivates the password function.
Level 1 Level 2
INPUT
PASSWORD
Level 3
PW.NEW
--------
Level 3
PW.OLD
--------
PW.NEW
--------
Setting
Use the RS keys to select "INPUT"
Press the L key [ENTER]
Press the L key [ENTER]
Use the RS keys to select "PW.NEW"
Enter the password and press the
L key [ENTER]
Press the c key (Clear) repeatedly to exit
the menu
Setting
Use the RS keys to select "INPUT"
Press the L key [ENTER]
Press the L key [ENTER]
Enter the old password
After the old password has been entered
correctly, "PW.NEW" is displayed.
Enter the desired password and press
the L key [ENTER]
Press the c key (Clear) repeatedly to exit
the menu